ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 963 / 1168

Chapter 32 show Commands
Management Switch Card User’s Guide
963
This table describes labels in the example.
32.3.31 show mstp Command
Syntax:
show mstp < mstid > [< end_mstid >]
where
This command displays information (such as bridge ID, topology change counter, etc.) of the
specified MST region(s).
Table 379
show monitor Command Information
LABEL DESCRIPTION
voltage
The power supply for each voltage has a sensor that can detect and report the voltage.
current
This is the present voltage reading.
nominal
This field displays the average voltage measured at this sensor.
high_lmt
This field displays the high voltage threshold for this sensor.
low_lmt
This field displays the low voltage threshold for this sensor.
temperature
This example displays the temperature measurements in degrees Celsius.
Each temperature sensor can detect and report the temperature. Temperature sensor 1 is near
the ADSL line driver. Temperature sensor 2 is near the main chipset. Temperature sensor 3 is
near the central processing unit.
current
This shows the current temperature at this sensor.
high_lmt
This field displays the high temperature threshold for this sensor.
low_lmt
This field displays the low temperature threshold for this sensor.
< mstid >
=
The first MST region ID.
< end_mstid >
= The last MST region ID.