ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 747 / 1168

Chapter 28 multicast Commands
Management Switch Card User’s Guide
747
This command displays the IGMP count limit setting status for the DSL ports on the line card in the
specified slot. The following example displays the IGMP count limit settings for the ports on the line
card in slot 3.
28.9 multicast igmpfilter Commands
Use the IGMP filter commands to define IGMP filter profiles and assign them to DSL ports.
IGMP filter profiles allow you to control access to IGMP multicast groups. You can have a service
available to a specific IGMP multicast group. You can configure an IGMP filter profile for an IGMP
multicast group that has access to a service (like a SIP server for example). Then you can assign
the IGMP filter profile to DSL ports that are allowed to use the service.
28.9.1 multicast igmpfilter set Command
Syntax:
switch igmpfilter set < slot-port > < igmpfilter >
where
This command sets an ADSL port(s) to use an IGMP filter profile.
The following example sets ADSL port 9 in slot 7 to use the
voice
IGMP filter profile.
ras> multicast igmpcount show 3
[slot9] igmpcount
port enable count
----- ------ -----
3- 1 - 5
3- 2 - 5
3- 3 - 5
3- 4 - 5
3- 5 - 5
3- 6 - 5
-------------------------- [snip] --------------------------
3-44 - 5
3-45 - 5
3-46 - 5
3-47 - 5
3-48 - 5
< igmpfilter >
=
The name of an IGMP filter profile.
ras> multicast igmpfilter set 7-9 voice