ZyXEL Communications LTE6100, Руководство пользователя

Страница: 51 / 189

Chapter 7 Quality of Service (QoS)
LTE6100 User’s Guide
51
7.3 The Queue Setup Screen
Use this screen to configure QoS queue assignment. Click Network Setting > QoS > Queue
Setup to open the screen as shown next.
Figure 25
Network Setting > QoS > Queue Setup
The following table describes the labels in this screen.
Table 16
Network Setting > QoS > Queue Setup
LABEL DESCRIPTION
Add new
Queue Click this to create a new entry.
# This is the index number of this entry.
Status This indicates whether the queue is active or not.
A yellow bulb signifies that this queue is active. A gray bulb signifies that this queue is not
active.
Name This shows the descriptive name of this queue.
Interface This shows the name of the LTE Device’s interface through which traffic in this queue passes.
Priority This shows the priority of this queue.
Weight This shows the weight of this queue.
Buffer
Management This shows the queue management algorithm used by the LTE Device.
Rate Limit
(kbps) This shows the maximum transmission rate allowed for traffic on this queue.
Modify Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent rules move up by
one when you take this action.