ZyXEL Communications LTE6100 Скачать руководство пользователя страница 123

Страница: 123 / 189

LTE6100 User’s Guide

123

H A P T E R

2 4

Troubleshooting

24.1 Overview

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.

•

Power, Hardware Connections, and LEDs

•

LTE Device Access and Login

•

Internet Access

•

UPnP

24.2 Power, Hardware Connections, and LEDs

The LTE Device does not turn on. None of the LEDs turn on.

Make sure the LTE Device is turned on.

Make sure you are using the power adaptor or cord included with the LTE Device.

Make sure the power adaptor or cord is connected to the LTE Device and plugged in to an
appropriate power source. Make sure the power source is turned on.

Turn the LTE Device off and on.

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

Make sure you understand the normal behavior of the LED. See

Section 1.5 on page 14

Check the hardware connections. See the Quick Start Guide.

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

Turn the LTE Device off and on.

Содержание LTE6100






























































































































































































Результаты поиска

Содержание LTE6100

Отзывы:

ZyXEL Communications LTE6100, Руководство пользователя, Страница: 123 / 189

Результаты поиска

Содержание LTE6100

Отзывы: