4
• MSC1224G supports two 10G (XFP) and six 1G
uplink/subtending interfaces:
■
2 optical fiber port (SFP modules)
■
2 100/1000BASE-Tx interface module
■
2 1000 Mbps interface modules (combo
design, SFP and copper)
• MSC1024G supports eight 1G Ethernet uplink &
subtending ports:
■
4 optical fiber port (SFP modules)
■
2 100/1000BASE-Tx interface module
■
2 1000 Mbps interface modules (combo
design, SFP and copper)
• One RS232 (DB-9) serial console port
• One 10/100M out-of-band Mgmt interface
• 16 Gigabit Ethernet (SerDes) backplane
interface
• 16K MAC addresses
• 1024 L2 multicast groups (1K scalability)
• 4K VLANs
• IPv6 capable (MSC1224GB, MSC1024GB)
E1 IMA Card—IMA1408G-81
• Hot swappable 8-port E1 IMA card, 8 groups
per card
• Support G.703, G.704
• Full-duplex bandwidth up to 16M
• One mini-RJ11 console port
• Support RFC1483/1577/2364/2684
• Support ATM Forum Rec UNI 3.0, UNI 3.1, UNI 4.0
• Support ITU-TI.361, I.371, G.804
Ethernet Line Card—ELC1220G-55
• Support 20 open slots for Fast Ethernet SFP
(100BASE-FX/BX/LX/EX)
• One mini-RJ-11 console
• Aggregates layer-2 traffic from Fast Ethernet
subscribers to the chassis system
• Support multicast VLAN, IGMP snooping, IGMP
filter and static multicast functions for MoD
services
• Support DHCP relay, option82 and snooping
functions
• Support ACL, anti-IP address spoofing and anti-
MAC address spoofing security functions
VDSL Line Card—VLC1424G-56
• Hot swappable 24-port VDSL2 line card
• Support G.993.2, G.994.1, G.997.1
• Maximum transmission rate up to
100 Mbps/100 Mbps
• One mini-RJ11 console port
• Two gigabit backplane
• Support VDSL2 profiles 8a, 8b, 8c, 8d, 12a, 12b,
17a and 30a
• Support frequency allocation bandplan 998
and 997
• Support customer PSD, RFI notch, single latency
in PTM mode and INP
• Support trellis coding
• Support IEEE 802.1ag Connectivity Fault
Management (CFM)
• IPv6 capable
VDSL Line Cards—
VLC1348G-51/VLC1348G-53/
VLC1324G-51/VLC1324G-53
• Hot swappable 48-port or 24-port VDSL2 line
card over POTS and over ISDN
• Support G.993.2, G.994.1, G.997.1
• Maximum transmission rate up to 100 Mbps/
50 Mbps
• One mini-RJ11 console port
• Two gigabit backplane
• Support VDSL2 profiles 8a, 8b, 8c, 8d, 12a, 12b
and 17a
• Support frequency allocation bandplan 998
and 997
• Support U0 band, customer PSD, RFI notch,
single latency in PTM mode and INP
• Support UPBO and DPBO, Reed Solomon and
trellis coding
• Support ADSL fall back with ADSL/ADSL2/
ADSL2+ CPE in Annex A, J, M, L modes
• Support IEEE 802.1ag Connectivity Fault
Management (CFM)
ADSL Line Cards—ALC1372G-51/ALC1248G-51
• Hot swappable 72-port or 48-port ADSL2/
ADSL2+ Annex A line card
• Maximum transmission rate up to 25 Mbps/
2.4 Mbps for ADSL2+
• One mini-RJ11 console port
• One gigabit backplane
• Support G.992.3 and G.992.5 spectral mask
• Support EOC and overhead channel access
defined in G.992.3 and Rec.G.997.1
• Support the latency path function specified in
G.992.3 and G.992.5
• Support Annex L and Annex M specified in
G.992.3 and G.992.5
• Support loop diagnostic function specified in
G.992.3 and G.992.5
• Support the power management capability
specified in G.992.3 and G.992.5
• Support the capability of the Seamless Rate
Adaptation (SRA) on-line configuration specified
in G.992.3 and G.992.5
• Support ADSL2+ 2-port bonding (G.998.1)
• IPv6 capable (ALC1372G-51)
ADSL Line Card—ALC1248G-53
• Hot swappable 48-port ADSL2/ADSL2+ Annex B
line card
• Support Annex M and Annex L specified in
G.992.3 and G.992.5
• Maximum transmission rate up to 25 Mbps/
2.4 Mbps for ADSL2+
• One mini-RJ11 console port
• One gigabit backplane
SHDSL Line Card—SLC1348G-22
• Hot swappable 48-port SHDSL/SHDSL.bis
line card
• Support ETSI TS 101 524 V 1.2.1, ITU-T G.991.2,
ITU-T G.991.2.bis
• ATM-based multi-pair bonding (G.998.1) up to
8 ports
• Symmetric transmission rate of 5.69 Mbps/port
• One mini-RJ11 console port
• One gigabit backplane
• Support IEEE EFM
VoIP Line Cards—VOP1372G-61/VOP1248G-61
• 72-port or 48-port VoIP line card
• Support H.248 version 2 or SIP singling protocol
• Compatible CPE including POTS phone, Fax,
analog modem and pay phone
• Support G.711 a/µ, G.726, G.729 a/b G.723.1
• 20K Busy Hour Call Attempts (BHCA)
• Configurable jitter buffer
• Support the generation of dial tone, second dial
tone, ringing tone (ring-back tone), busy tone,
off-hook warning tone
• Support call waiting, call hold, call transfer,
return and call back on busy
• Emergency call local route
• Local dial available
• MLT (Metallic Loop Testing for subscriber lines)
and GR-909 loop diagnostic
• Ringer Max output power:
■
VOP1372G-61: 24 Watt
■
VOP1248G-61: 15 Watt
• IPv6 capable (VOP1372G-61)
