ZyXEL Communications IES-1248-51A, Руководство пользователя

Страница: 388 / 654

Chapter 53 Alarm Commands
IES-1248-51V User’s Guide
388
The source is where the alarm originated. This is either a DSL port number, one of
the Ethernet ports (enet 1 or 2), or “eqpt” for the system itself.
53.2.2 Alarm Port Show Command Example
This example shows the results of using this command.
ras> alarm show
[current alarm list]
no alarm condition severity timestamp source
------ ------ -------------------- -------- -------------- -------
1 eqpt +fan_err critical 09/19 12:49:10 eqpt 1
2 eqpt +fan_err critical 09/19 12:49:10 eqpt 3
3 eqpt +fan_err critical 09/19 12:49:10 eqpt 2
ras> alarm port show
Press any key to continue, 'e' to exit, 'n' for nopause
no ifindex severity
----- ---------- -----------
01 01 minor
02 02 minor
03 03 minor
04 04 minor
05 05 minor
06 06 minor
07 07 minor
08 08 minor
09 09 minor
10 10 minor
11 11 minor
12 12 minor
13 13 minor
14 14 minor
15 15 minor
16 16 minor
17 17 minor
18 18 minor
19 19 minor
20 20 minor
Press any key to continue, 'e' to exit, 'n' for nopause