manualshive.com logo in svg

ZyXEL Communications HES-309M, Руководство пользователя, Страница: 64 / 246

Поделиться
Скачать
ZyXEL Communications HES-309M Скачать руководство пользователя страница 64

Chapter 6 WiMAX

HES-309M Series User’s Guide

64

This screen contains the following fields:

Table 13   

Connect

LABEL

DESCRIPTION

Applied Frequency Information

This table shows the scanning result you made in the 

WiMAX > Profile > Frequency 

Settings

 and 

WiMAX > Wide Scan

 screens.

Note: You cannot see the wide scanning result that you made in 

WiMAX > Wide 

Scan

 screen if the 

Join Wide Scan Result

 is set to 

No

 in the 

WiMAX > 

Profile > Frequency Settings

 screen.

Frequency
(KHz)

This field displays the available center frequency of a frequency band in 
kilohertz (KHz).

Bandwidth 
(MHz)

This field displays the bandwidth of the frequency band in megahertz 
(MHz).

Available Network List

Connected 
Mode

Select a connect mode:

•

Auto Connect Mode 

- This allows the WiMAX Device to connect to 

any of the base stations on the list automatically.

•

Network Search Mode

 - This allows the WiMAX Device to connect 

to a user-specified base station. Select this option,  choose a base 
station, click 

Connect

.

Connect

Click this to connect to the selected base station.

Disconnect

Click this to disconnect from the selected base station.

BSID

This field displays the base station MAC address.

Preamble ID

This field displays the preamble ID.

The preamble ID is the index identifier in the header of the base 
station’s broadcast messages. In the beginning of a mobile stations’s 
network entry process, it searches for the preamble and uses it to 
additional channel information. 

The preamble ID is used to synchronize the upstream and downstream 
transmission timing with the base station.

Frequency
(MHz)

This field displays the center frequency the base station uses in 
kilohertz (KHz).

Bandwidth 
(MHz)

This field displays the frequency band bandwidth the base station uses 
in megahertz (MHz).

RSSI (dBm)

This field displays the Received Signal Strength Indication (RSSI), 
which is an overal measurement of radio signal strength. A higher RSSI 
level indicates a stronger signal.

CINR (dB) 
R3/R1

This field displays the average Carrier to Interference plus Noise Ratio 
for the current connection. This value is an indication of overal radio 
signal quality, where a higher value means a better quality signal.

Search

Click this to have the WiMAX Device scan for base stations in the 
frequency band(s) listed in the 

Applied Frequency Information

table.

Connected BS Info

Содержание HES-309M























































































































































































































































Отзывы:

Нет отзывов