ZyXEL Communications GS2200-24 Series, Руководство пользователя

Страница: 80 / 358

Chapter 8 Basic Setting
GS2200-24 User’s Guide
80
The following table describes the labels in this screen.
Table 11 Basic Setting > IP Setup
LABEL DESCRIPTION
Domain Name
Server DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. Enter a domain name server
IP address in order to be able to use a domain name instead of an IP
address.
Default Management IP Address
DHCP Client
Select this option if you have a DHCP server that can assign the
Switch an IP address, subnet mask, a default gateway IP address and
a domain name server IP address automatically.
Static IP Address Select this option if you don’t have a DHCP server or if you wish to
assign static IP address information to the Switch. You need to fill in
the following fields when you select this option.
IP Address Enter the IP address of your Switch in dotted decimal notation for
example 192.168.1.1.
IP Subnet Mask Enter the IP subnet mask of your Switch in dotted decimal notation
for example 255.255.255.0.
Default Gateway Enter the IP address of the default outgoing gateway in dotted
decimal notation, for example 192.168.1.254.
VID Enter the VLAN identification number associated with the Switch IP
address. This is the VLAN ID of the CPU and is used for management
only. The default is "1". All ports, by default, are fixed members of
this "management VLAN" in order to manage the device from any
port. If a port is not a member of this VLAN, then users on that port
cannot access the device. To access the Switch make sure the port
that you are connected to is a member of Management VLAN.
Management IP Addresses
You can create up to 64 IP addresses, which are used to access and manage the Switch
from the ports belonging to the pre-defined VLAN(s). You must configure a VLAN first.
IP Address
Enter the IP address for managing the Switch by the members of the
VLAN specified in the
VID field below.
IP Subnet Mask Enter the IP subnet mask in dotted decimal notation.
VID Type the VLAN group identification number.
Default Gateway Enter the IP address of the default outgoing gateway in dotted
decimal notation.
Add Click Add to insert the entry to the summary table below and save
your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the
Save link
on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.
Index This field displays the index number of the rule. Click an index
number to edit the rule.
IP Address This field displays the IP address.
IP Subnet Mask This field displays the subnet mask.
VID This field displays the ID number of the VLAN group.