ZyXEL Communications GS-4012F, Руководство пользователя

Страница: 253 / 306

GS-4012F User’s Guide
252 Chapter 40 Command Examples
40.4 traceroute
Syntax:
traceroute <ip> [in-band|out-of-band|vlan <vlan-id>][ttl <1-
255>] [wait <1-60>] [queries <1-10>]
where
This command displays information about the route to an Ethernet device. The following
example displays route information to an Ethernet device with an IP address of
192.168.1.100
.
Figure 152 traceroute Command Example
40.5 Enabling RSTP
To enable RSTP on a port. Enter
spanning-tree
followed by the port number and press
[ENTER]
.
The following example enables RSTP on port 10.
<ip> =
The IP address of an Ethernet device.
[in-band|out-of-
band|vlan <vlan-
id> ] =
Specifies the network interface or the VLAN ID to which the
Ethernet device belongs.
[ttl <1-255>] =
Specifies the Time To Live (TTL) period.
[wait <1-60>] =
Specifies the time period to wait.
[quesries <1-10>] =
Specifies how many tries the switch performs the traceroute
function.
ras> traceroute 192.168.1.100
traceroute to 192.168.1.100, 30 hops max, 40 byte packet
1:192.168.1.100 (10 ms) (10 ms) (0 ms)
traceroute done: