ZyXEL Communications EMG6765-Q10A, Руководство пользователя

Страница: 37 / 219

Chapter 6 Tutorials
EMG6765-Q10A User’s Guide
37
Follow the steps below to configure the wireless settings on your EMG6765-Q10A.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Section 2.3 on page 18 ).
1
Make sure the Wi-Fi button (at the back panel of the EMG6765-Q10A) is set ON .
2
Click Configuration > Network > Wireless LAN 2.4G or 5G to open the General screen.
3
Confirm that the wireless LAN is enabled on the EMG6765-Q10A. Configure the screen using the
provided parameters. Click
Apply .
4
Open the Dashboard screen. Verify your wireless and wireless security settings under Device Information
and check if the WLAN connection is up and under Interface Status .
Thomas can now use the WPS feature to establish a wireless connection between his notebook and the
EMG6765-Q10A (see
Section 6.3 on page 37 ). He can also use the notebook’s wireless client to search
for the EMG6765-Q10A (see Section 6.5 on page 44 ).
6.3 Connecting to the EMG6765-Q10A’s Wi-Fi Network
Using WPS
This section gives you an example of how to set up a wireless network using WPS. This example uses the
EMG6765-Q10A as the AP and a WPS-enabled Android 4.4.2 smartphone as the wireless client.
There are two WPS methods for creating a secure connection. This tutorial shows you how to do both.