ZyXEL Communications EMG5324-D10A, Быстрый старт

Страница: 6 / 11

66
• The ETHERNET light turns on if the corresponding ETHERNET port
is properly connected and it blinks when there is traffic. If you do not
connect a computer correctly to any of these ports, the
ETHERNET
lights will not turn on.
• The WLAN/WPS light stays on and green when the wireless LAN is
ready.The light will not turn on if the wireless connection is not
activated. It is blue when WPS configured.
• The WAN light stays on if a physical Ethernet connection to the WAN
exists. It blinks when transmitting data.
• The INTERNET light is green when Internet access is available. It
blinks when transmitting data.
• The PHONE lights stay on when your SIP account is registered and
they blink if the receiver is off the hook.
• The USB light(s) turn on when there is a USB device (printer or
memory stick) or a 3G adapter connected to the EMG5324-D10A
and blinks when transmitting data.
If the POWER light does not turn on during start up, try turning the EMG5324-D10A
off, check the connections, wait a few seconds and then turn it back on. If the
problem persists, you may have a hardware problem and you need to contact your
vendor.
Internet Access Setup
If you have Internet access, the WAN and INTERNET lights will be on.
Open your web browser and go to http://www.zyxel.com. You may be
prompted to enter your username and password when attempting to
browse.
• If the WAN light is not on, try turning the EMG5324-D10A off, check
the connections, wait a few seconds and then turn it back on. If the
WAN light is still not on, contact your service provider.
• If the WAN light is on, but the INTERNET light is off, you may need
to enter your Internet access configuration using the Web
Configurator - see page
9 .