manualshive.com logo in svg

ZyXEL Communications Dimension ES-4124, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications Dimension ES-4124 Скачать руководство пользователя страница 263

ES-4124 User’s Guide

Chapter 42 Introducing Commands

261

means that the contact and location fields are optional.

• “Command” refers to a command used in the command line interface (CI command). 
• The | symbol means “or”.
• The entry <cr> in the command lines refers to carriage return. Press [ENTER] or carriage 

return after a command to execute the command. 

• Use the up or down arrow key to scroll through the command history list. 
• You may enter a unique part of a command and press [TAB] to have the switch 

automatically display the full command. For example, if you enter “

config

” and press 

[TAB], the full command of “configure” automatically displays.

• Each interface refers to an Ethernet port on the switch. Commands configured after the 

interface command correspond to those ports. 

• Type multiple ports or port ranges separated by a comma. Ranges of port numbers are 

typed separated by a dash.

42.5  Changing the Password

This command is used to change the password for Enable mode. By default the same password 
is used to enter the command line interface (CLI) and Enable and Config modes of the CLI. 

The password you change with this command is required to enter Enable and Config modes of 
the CLI.

Syntax: 

password <password>

where  

42.6  Privilege Levels

You can use a command whose privilege level is equal to or less than that of your login 
account. For example, if your login account has a privilege level of 12, you can use all 
commands with privilege levels from 0 to 12. 0 privilege level commands are available to all 
login accounts.

Note: 

If you use an external RADIUS server to authenticate users, you can use a 
VSA (Vendor Specific Attribute) to configure a privilege level for an account on 
the RADIUS server. See 

Section 16.1.1.1 on page 125

 for more information.

Use the following commands to specify privilege levels for login accounts.

password <password>

= Specifies the new password (up to 32 alphanumeric characters) 

users have to type in to enter Enable and Config modes. 

Содержание Dimension ES-4124





















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды