ZyXEL Communications Comet 3356, Руководство пользователя

Страница: 36 / 76

AT Command Set Summaries 29
Command Function
V0
V1(default) Display result code in digital format
Display result code in verbose format
W0(default)
W1
W2 Connect message report only the DTE speed
Connect message report the line speed, the error correction
protocol, and the DTE speed
Connect message report only the DCE speed
Xn Select extended result code
X0 X1 X
2 X3 X4(default)
Connect
Message Partial Full F
ul
l Full Full
Dialtone
Monitor Off Off O
n Off On
Busy Tone
Monitor Off Off O
ff On On
Y0(default)
Y1 Disable long-space disconnect
Enable long-space disconnect
Zn Perform a soft reset and load user profile n (n=0 or 1)
&C0
&C1(default) DCD remains ON at all times
DCD follows carrier state
&D0
&D1
&D2(default)
&D3
DTR is ignored
DTR drop causes the modem to return to the command state
without disconnecting
DTR drop causes the modem to hang up, inhibit auto-answer
DTR drop causes the modem to perform a soft reset (to profile
set with &Y)
&Fn Restore factory-default profile n (n=0 or 1)
&G0(default)
&G1
&G2 Disable guard tone (for US models)
Disable guard tone
Select 1800Hz guard tone
&K0
&K3
&K4
&K5
&K6(default) Disable flow control
Enable RTS/CTS flow control
Enable XON/XOFF flow control
Enable transparent XON/XOFF flow control
Enable both RTS/CTS and XON/XOFF flow control
&P0(default)
&P1
&P2
&P3 10 pulses/sec, 39/61 make-break ratio
10 pulses/sec, 33/67 make-break ratio
20 pulses/sec, 39/61 make-break ratio
20 pulses/sec, 33/67 make-break ratio