CAM3115 User’s Guide
15
www.zyxel.com
Belgium:
The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of
any outdoor wireless link having a range exceeding 300 meters. Please check
http://www.bipt.be for more details.
Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter
dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie
(BIPT). Zie http://www.bipt.be voor meer gegevens.
Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres
doivent être notifiées à l’Institut Belge des services Postaux et des Télécommunications (IBPT).
Visitez http://www.ibpt.be pour de plus amples dé tails.
Denmark:
In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.
I Danmark må frekvensbå ndet 5150 - 5350 også anvendes udendø rs.
Italy:
This product meets the National Radio Interface and the requirements specified in the
National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within
the boundaries of the owner's property, its use requires a “general authorization.” Please check
http://www.sviluppoeconomico.gov.it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano
Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio
fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”. Consultare
http://www.sviluppoeconomico.gov.it/ per maggiori dettagli.
Latvia:
The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic
Communications Office. Please check http://www.esd.lv for more details.
2.4 GHz frekvenè u joslas izmantoð anai â rpus telpâ m nepiecieð ama atïauja no Elektronisko
sakaru direkcijas. Vairâ k informâ cijas: http://www.esd.lv.
Notes:
1.
Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive
1999/5/EC has also been implemented in those countries.
2.
The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm)
of a device can be calculated by adding the gain of the antenna used(specified in dBi) to the
output power available at the connector (specified in dBm).