ZyXEL Communications AMG1302-T11C, Руководство пользователя

Страница: 32 / 307

AMG1302-T11C User’s Guide
32
C
H A P T E R
4
Tutorials
4.1 Overview
This chapter shows you how to use the AMG1302-T11C’s various features.
• Setting Up Your DSL Connection , see page 32
• IPv6 Address Configuration , see page 35
• Setting Up a Secure Wireless Network , see page 35
• Configuring the MAC Address Filter for Restricting Wireless Internet Access , see page 43
• Setting Up NAT Forwarding for a Game Server , see page 44
• Configuring Firewall Rules to Allow a Specified Service , see page 46
• Configuring Static Route for Routing to Another Network , see page 49
• Port Binding Configuration , see page 51
• Configuring QoS to Prioritize Traffic , see page 55
• Access the AMG1302-T11C from the Internet Using DDNS , see page 58
4.2 Setting Up Your DSL Connection
This tutorial shows you how to set up your Internet connection using the web configurator.
If you connect to the Internet through a DSL connection, use the information from your Internet
Service Provider (ISP) to configure the AMG1302-T11C. Do the following steps:
1
Connect the AMG1302-T11C properly. Refer to the Quick Start Guide for details on the AMG1302-
T11C’s hardware connection.
2
Connect one end of a DSL cable to the DSL port of your AMG1302-T11C. The other end should be
connected to the DSL port in your house or a DSL router/modem provided by your ISP.
3
Connect one end of Ethernet cable to an Ethernet port on the AMG1302-T11C and the other end to
a computer that you will use to access the web configuration.
4
Connect the AMG1302-T11C to a power source, turn it on and wait for the POWER LED to become
a steady green.