ZyXEL Communications AMG1302-T10A Скачать руководство пользователя

Страница: 297 / 332

Appendix G Legal Information

AMG1302-T10A User’s Guide

297

Viewing Certifications

Go to

http://www.zyxel.com

Select your product on the ZyXEL home page to go to that product's page.

Select the certification you wish to view from this page.

ZyXEL Limited Warranty

ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in

materials or workmanship for a period of up to two years from the date of purchase. During the

warranty period, and upon proof of purchase, should the product have indications of failure due to

faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective

products or components without charge for either parts or labor, and to whatever extent it shall

deem necessary to restore the product or components to proper operating condition. Any

replacement will consist of a new or re-manufactured functionally equivalent product of equal or

higher value, and will be solely at the discretion of ZyXEL. This warranty shall apply if the product

has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal

working conditions.

Notice

Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser.

This warranty is in lieu of all other warranties, express or implied, including any implied warranty of

merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for

indirect or consequential damages of any kind to the purchaser.

To obtain the services of this warranty, contact ZyXEL's Service Center for your Return Material

Authorization number (RMA). Products must be returned Postage Prepaid. It is recommended that

the unit be insured when shipped. Any returned products without proof of purchase or those with

an out-dated warranty will be repaired or replaced (at the discretion of ZyXEL) and the customer

will be billed for parts and labor. All repaired or replaced products will be shipped by ZyXEL to the

corresponding return address, Postage Paid. This warranty gives you specific legal rights, and you

may also have other rights that vary from country to country.

Registration

www.zyxel.com for global products, or at www.us.zyxel.com for North American products.

End-User License Agreement for "AMG1302-T10A"

WARNING

: ZyXEL Communications Corp. IS WILLING TO LICENSE THE SOFTWARE TO YOU ONLY

UPON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS LICENSE

AGREEMENT. PLEASE READ THE TERMS CAREFULLY BEFORE COMPLETING THE INSTALLATION

PROCESS AS INSTALLING THE SOFTWARE WILL INDICATE YOUR ASSENT TO THEM. IF YOU DO

NOT AGREE TO THESE TERMS, THEN ZyXEL IS UNWILLING TO LICENSE THE SOFTWARE TO YOU,

IN WHICH EVENT YOU SHOULD RETURN THE UNINSTALLED SOFTWARE AND PACKAGING TO THE

PLACE FROM WHICH IT WAS ACQUIRED OR ZyXEL, AND YOUR MONEY WILL BE REFUNDED.

Содержание AMG1302-T10A













































































































































































































































































































































Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды

ZyXEL Communications AMG1302-T10A, Руководство пользователя

Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды