AMG1202-T10B/AMG1302-T10B
Support Notes
60
All contents copyright © 2013 ZyXEL Communications Corporation.
Setup
pool for the clients can be any of the three networks.
TCP/IP
Setup
Enter the first LAN IP address for the AMG1302-T10B/AMG1202-T10B.
This will create the first route in the enif0 interface.
(2) Edit the second network in
Network Setting -> Home Networking -> IP
Alias
by configuring the AMG1302-T10B/AMG1202-T10B
’s second and third
LAN IP
addresses.
Key Settings:
IP Alias 1
Active it and enter the second LAN IP address for the
AMG1302-T10B/AMG1202-T10B. This will create the second route in the
enif0:0 interface.
10. Using Call Scheduling
What is Call Scheduling?
Call scheduling enables the mechanism for the AMG1302-T10B
/AMG1202-T10B to run the remote node connection according to the
pre-defined schedule. This feature is just like the scheduler ina video recorder
which records the program according to the specified time. Users can apply at
most 4 schedule sets in Remote Node. The remote node configured with the
schedule set could be "Forced On", "Forced Down", "Enable Dial-On-Demand",
or "Disable Dial-On-Demand" on specified date and time.
Time Service in AMG1302-T10B/AMG1202-T10B
There is no RTC (Real-Time Clock) chip so the AMG1302-T10B
/AMG1202-T10B should launch a mechanism to get current time and date
from external server in boot time. Time service is implemented by the
Daytime