ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 400 / 435

AAM1212-51/53 Series User’s Guide
400 Chapter 53 Virtual Channel Management
53.8.2 PAE PVC Set Command
Syntax:
ras> adsl paepvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]>
<pvid> <priority> [acname <acname>] [srvcname <srvcname>] [hellotime
<hellotime>]
where
This command creates a PPPoA-to-PPPoE PVC to allow communication between the ATM
(CPE) and Ethernet network (BRAS) segments. The PVC is mapped to a PPPoE session that
connects to the specified BRAS.
The following example creates a PPPoA-to-PPPoE PVC (
1/33
) for port
1
. The VLAN ID is
1, and the IEEE 802.1p priority is 0. This configuration is for the
video
service on the
vom
access concentrator. The switch waits 10 seconds before terminating the PPPoE session.
Figure 285 PAE PVC Set Command Example
<portlist> =
The port number of the PAE PVC. You can specify a single
DSL port <1>, all DSL ports <*> or a list of DSL ports <1,3,5>.
You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.
<DS vcprofile =
Assign a VC profile to use for this channel’s downstream traffic
shaping.
[,US
vcprofile]> =
Assign a VC profile to use for policing this channel’s upstream
traffic. The AAM1212 does not perform upstream traffic
policing if you do not specify an upstream VC profile.
<pvid> =
1 – 4094; the VLAN Identifier to add to Ethernet frames that the
system routes using this PVC.
<priority> =
Set the IEEE 802.1p priority (0~7) to add to the traffic that uses
this PVC.
<acname> =
This field is optional. Specify the hostname of a remote access
concentrator if there are two access concentrators (or BRAS) on
the network or that you want to allow PAE translation to the
specified access concentrator.
<srvcname> =
This field is optional. Specify the name of the service that uses
this PVC. This must be a service name that you configure on the
remote access concentrator.
<hellotime> =
0 - 600; specify the timeout, in seconds, for the PPPoE session.
Enter 0 if there is no timeout.
ras> adsl paepvc set 1 1 33 DEFVAL 1 0 acname vom srvcname video hellotime 10