ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx, Руководство пользователя

Страница: 187 / 402

Chapter 11 Firewall Configuration
P-660HWP-Dx User’s Guide
65
11.10.2 Half-Open Sessions
An unusually high number of half-open sessions (either an absolute number or measured as
the arrival rate) could indicate that a Denial of Service attack is occurring. For TCP, "half-
open" means that the session has not reached the established state-the TCP three-way
handshake has not yet been completed (see
Figure 93 on page 38 ). For UDP, "half-open"
means that the firewall has detected no return traffic.
The P-660HWP-Dx measures both the total number of existing half-open sessions and the rate
of session establishment attempts. Both TCP and UDP half-open sessions are counted in the
total number and rate measurements. Measurements are made once a minute.
When the number of existing half-open sessions rises above a threshold (
max-incomplete
high ), the P-660HWP-Dx starts deleting half-open sessions as required to accommodate new
connection requests. The P-660HWP-Dx continues to delete half-open requests as necessary,
until the number of existing half-open sessions drops below another threshold (
max-
incomplete low ).
When the rate of new connection attempts rises above a threshold ( one-minute high ), the P-
660HWP-Dx starts deleting half-open sessions as required to accommodate new connection
requests. The P-660HWP-Dx continues to delete half-open sessions as necessary, until the rate
of new connection attempts drops below another threshold (
one-minute low ). The rate is the
number of new attempts detected in the last one-minute sample period.
11.10.2.1 TCP Maximum Incomplete and Blocking Time
An unusually high number of half-open sessions with the same destination host address could
indicate that a Denial of Service attack is being launched against the host.
Whenever the number of half-open sessions with the same destination host address rises above
a threshold (
TCP Maximum Incomplete ), the P-660HWP-Dx starts deleting half-open
sessions according to one of the following methods:
• If the Blocking Time timeout is 0 (the default), then the P-660HWP-Dx deletes the oldest
existing half-open session for the host for every new connection request to the host. This
ensures that the number of half-open sessions to a given host will never exceed the
threshold.
• If the Blocking Time timeout is greater than 0, then the P-660HWP-Dx blocks all new
connection requests to the host giving the server time to handle the present connections.
The P-660HWP-Dx continues to block all new connection requests until the
Blocking
Time expires.
11.10.3 Configuring Firewall Thresholds
The P-660HWP-Dx also sends alerts whenever TCP Maximum Incomplete is exceeded. The
global values specified for the threshold and timeout apply to all TCP connections.
Click
Firewall , and Threshold to bring up the next screen.