Touchscreen User Manual – Issue 1
Zytronic X-Y Controller (Serial and USB)
45
5.6 Status Page
The
Status
page shows device status and allows for driver and controller re-initialization along with
test functions. The Status page is shown in Figure 37.
Figure 37:
Status Page
Function
Description
Shows the actual controller type in use.
Indicates, as best as possible, if the device is connected. For serial
controllers this may be difficult to determine.
A device may need the driver to send firmware commands to the
device to be initialized and ready for use. The macro is shown, and
can be edited, in the UPDD Advance Console. The status of the
macro processing is shown as follows:
No macro is defined.
Indicates the macro was sent to the device but
the driver is not expecting a response so cannot
indicate the success of the macro transmission
The init macro contains an ACK statement but
a valid acknowledgement was not seen from
the device within the specified time.
A red cross indicates that the driver is not
loaded or an error was encountered during
controller initialization. If the driver is loaded
but the device is not functioning the most
likely cause is that the specified port
resource(s) are already in use by another
process or the port is not available.