Zynex Medical InWave, Руководство пользователя

Страница: 28 / 32

28
Care, Maintenance, and Disposal
Control Unit
The enclosure and display window can be cleaned using a damp cloth or
antiseptic wipe. Allow the unit to dry thoroughly before using. Do not spray
cleaning solutions directly onto the unit, or immerse it in water.
Before each use, the unit should be visually inspected for signs of wear or
damage. Discontinue use and contact Zynex Medical if any damage is noticed.
Dispose of properly in accordance with all local, federal and international
regulations. See WEEE symbol description on page 8. The unit may also be
returned to Zynex Medical, Inc. or the distributor for disposal.
Battery
Use only 9 V alkaline batteries to power the InWave. The battery
compartment on the back of the device opens by sliding the cover downwards.
Low Battery is indicated by the battery icon in the display. Replace with a new
battery. Remove the battery if the device will be inactive for greater than two
weeks.
The InWave operates normally even if the 9 V battery is inserted with reverse
polarity.
Dispose of properly in accordance with all local, federal and international
regulations. See Chemical Risk Reduction Ordinance SR 814.81, Annex 2.15
or 40CFR273.2 for additional information. Batteries may also be returned to
Zynex Medical, Inc. or the distributor for disposal.
Vaginal Probe
Note: The probe is for single patient use only . Follow the directions of your
prescribing physician.
Before each use, the probe should be visually inspected for signs of wear or
damage. Discontinue use and contact Zynex Medical if any damage is noticed.