Setup: Connecting your Sensor to Enterprise Wi-Fi
11. Go to the Setup section
within the app and click on the name of your sensor (your
sensor name is the 5 character code on the back of the device)
12. Select the search icon next to the SSID field to find your Wi-Fi network. If your network
does not appear after searching, you can also manually type it in. Note that this field is
case sensitive.
13. Add your EAP identity, username, and password. On some networks your username and
identity are the same thing (e.g. an email address), but identity might also be blank if
your network uses “Anonymous identity.”. Consult with your IT administrators.
14. Click ‘Test’ to confirm the network connection works.
15. Once the test succeeds click ‘Save’.
Setup: Connecting your Zynect LoRaWAN Gateway to Wi-Fi
16. Remove your Zynect LoRaWAN Gateway from the packaging and plug it into the wall,
preferably within 50ft of your Wi-Fi router.
17. Put the
LoRaWAN Gateway in setup mode by plugging it in and holding down the reset
button for 10 seconds. The light should start flashing orange and the Minihub network
should appear in your Wi-Fi scans.
18.
The password for the LoRaWAN Gateway (Minihub) is printed on the back of the device
under the heading Wi-Fi password. Connect your computer, phone, or tablet to the
Minihub network using that password.
19.
Open a web browser (preferably Google Chrome) and type 192.168.4.1 into the address
bar, this brings you to the Gateway setup page.
20.
Select your Wi-Fi network and enter your password. Leave the password field blank if
you’re using an open network.
21.
Click the ‘Save and Reboot’ button.
22.
The gateway will blink GREEN for a few seconds while it connects to this network. Then,
it will blink GREEN<->RED for a few seconds while it connects to The Things Network.
23.
If your configuration was successful, the LED will be solid GREEN which means that the
gateway is successfully connected to the LoRaWAN network.
24.
This process is described in more detail here:
https://www.thethingsnetwork.org/docs/gateways/thethingsindoor/#activate-your-gatewa
y-in-under-5-min
Setup: Connecting your Sensor to LoRaWAN
25. If you are using the Zynect LoRaWAN Gateway follow setup instructions (16-24). If you
are using a different type of LoRaWAN Gateway, confirm it is up and running prior to
proceeding with the next steps.