4.
Valet / Service Mode
- Valet / Service mode prevents the alarm
from arming if the automatic arming feature is selected.
Valet / Service Mode disables the alarm system.
To activate Valet / Service mode, turn the ignition ON, close all the
vehicles entry points (doors / boot / bonnet) and press and hold
Button 2 for two seconds. The siren will chirp once (indicators or
parking lights will flash once) and the LED will turn solid Red to
indicate the system is in Valet / Service Mode
To deactivate Valet / Service mode, turn the ignition ON, close all the
entry points (doors / boot / bonnet) and press and hold Button 2 for
two seconds. The siren will chirp twice (indicators or parking lights will
flash twice) and the LED will turn OFF to indicate that Valet / Service
mode has been deactivated.
*Omni Lock
- The vehicles doors can be locked and unlocked by
using the remote transmitter whilst the ignition is on. (*Note: Vehicle
must be equipped with central locking)
Temporary Silent Arm / Disarm
– Press Buttons 1 and 2
simultaneously to arm the alarm silently. Press Button 2 to disarm the
alarm silently.
Last Stage Arming Memory
– If Alarm is armed and the vehicle’s
battery is disconnected, when the battery is re-connected the alarm
system will remain armed.
Remote Control Code Learning
– The Alarm system can hold up
to four Remote Controls. At any time a lost or stolen remote
transmitter can be deleted from memory by your authorised installer.
* Locking Outputs
- If your vehicle is equipped with central locking,
the alarm system can be connected so the doors will lock when the
alarm is armed and unlock when disarmed.
* Remote Boot Release
- Press and hold Button 2 for two
seconds, the siren will chirp once and the boot will open.
(Vehicle must contain electronic boot release for this feature to work)
* Starter Disable / Immobiliser
– Once the Alarm is activated, the
vehicle will be immobilised. The starter motor circuit will be
interrupted. Once the Alarm is deactivated, the immobiliser will be
deactivated.
* Optional Features - Additional parts and labour may be required.
