To remove the Barndoors gently pull up on one of the two
retention tabs until it disengages from the groove. Rotate the
Barndoors downward and remove them from the light head. Be careful not to over extend the retention tabs.
FOLDING THE BARNDOORS:
The Barndoor Leaves must be folded in a certain order for proper stowage. Begin by closing the Leaf adjacent to the word
‘First’, then continue folding the remaining Leaves in counter-clockwise order.
ADDITIONAL DIFFUSION:
There is one translucent barn door leaf included as part of the Newz Light. This leaf can be used over the face of the light
to further diffuse the light output for a softer lighting effect.
page 4
ZyLink
TM
WIRELESS CONTROL OVERVIEW:
Each Zylight fixture may be connected to another Zylight fixture
using the integrated ZyLink wireless control. There is no network to configure, no routers to set - it’s wireless, it’s automatic
and it’s built into every Zylight. Zylight instruments linked together on the same channel act in concert as if they were one
unified source.
Adjustments made to one light will change all lights in the group. A group can support as many Zylight instruments lights as
you wish.
Some Zylight instruments may be operated independently and others operated in one or more groups. Any independent
Zylight instrument may be associated with a group. Wireless settings are saved when power is removed from an instrument
allowing breaks during filming or lighting plan changes without losing settings.
ZyLink OPERATION:
Press and hold in the wireless button for 3 seconds on the side of the articulating arm to enable or disable ZyLink. The
display will show the ZyLink wireless icon when it is active. The Newz can be connected to one of 10 ZyLink channels. To
set or change the ZyLink channel, press and quickly release the wireless button to toggle through channels 1-10.
page 5
STROBE OPERATION:
