Zylight F8-100, Инструкция пользователя

Страница: 5 / 20

Safety Precautions Cont.
• To reduce the risk of electrical shock or fire, do not
submerge this fixture in water.
• Do not spill large amounts of water or other liquids into or on
to your fixture.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break off the
ground prong from the electrical cord. This prong is used to reduce
the risk of electrical shock and fire in case of an internal short.
• Disconnect from main power before making any type of
connection.
• Do not remove the lens under any conditions. There are no user
serviceable parts inside.
• Never operate this fixture if the Fresnel lens is removed.
• Never plug this unit in to a dimmer pack.
• Always be sure to mount this fixture in an area that will allow proper
ventilation. Allow at least 6" (15cm) between this device and a wall.
• Do not attempt to operate this fixture if it becomes damaged.
• During long periods of non-use, disconnect the fixture's main
power.
• Always mount this fixture in safe and stable matter. Always use a
safety cable as part of a secure installation. This includes securing
the barn doors with a safety cable.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the fixture.
• Cleaning: The fixture should be cleaned only as recommended by
the manufacturer. See page 10 for cleaning details.
• Heat: The instrument should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the
instrument.
C. The instrument has been submerged in water
D. The instrument does not appear to operate normally or exhibits
a marked change in performance.
Page 4