ZYGO Industries, Inc.
PO Box 1008
Portland, OR 97207-1008
7409 SW Tech Center Drive, Suite 125
Tigard OR 97223-8082
U.S.A. / Canada: (800) 234-6006 TEL:
(503) 684-6006
FAX:
(503) 684-6011
4
NOTE:
For Scan mode to function
properly, the
Control
Panel/Keyboard Properties
“Enable Character Repeat”
check-box should be
unchecked.
Preferences
The two modes of operation share a common Preferences screen where the
mode can be selected and settings can be changed.
Go to Preferences by selecting “Preferences” from the “File” menu in Keyboard
mode or, by simultaneously pressing “Ctrl” and “P” while in Scan mode.
Preferences is divided into 4 sections.
Scan Switch Jack
Use a normally-open switch to scan or the Esc key if no switch is in
use.
In Scan mode…
Press Ctrl P to return to Preferences
Press Ctrl S for Help
Press Ctrl Q to Exit Persona
KBD1 ...... Lower case, Phrases, Instant
Speak
KBD2 ...... Upper Case, Abbreviations,
Pronunciations
KBD3 ...... Numbers, Special
characters, Open, Save,
Print, Scan Rate, Volume
• In
Preferences/Scan Options
, there are 3
on-screen keyboards from which to
choose:
QWERTY
ABCDE
Optimized
• Refer to
Preferences/Scan Mode
for
more information regarding scanning.
On-Screen Keyboard
• The on-screen keyboard is where
letters, numbers and commands are
selected. The on-screen keyboard has
3 panels from which to choose:
