Zygo-USA Optimist MMX-3, Руководство пользователя

Страница: 24 / 40

ZYGO-USA Optimist MMX-3 24 NL-
3 User’s Manual
To achieve optimal battery performance, you may need to do a battery
calibration at a 3-month interval. To do this:

Fully charge the battery.

Then discharge the battery by entering the BIOS setup screen. (Press F2 key as soon as you turn on
the computer. And let it remain on the setup screen until the battery runs out.

Fully charge the battery again.
Using Power Options
Operating System Power Management provides basic power saving features. In the power configuration
dialogue box, you may enter time-out values for display and hard disk drive.
Operating System power manager saves power by turning off hard drive after 1 minute of inactivity, for
example.
Also consult Operating System user guide for more information on how to use
Operating System power management functions. Actual dialogue box shown above may appear slightly
different.
Suspend Mode
Standby Suspend
The system automatically enters this mode after a period of inactivity, which is set in the Power Scheme dialog
box. In Standby mode, hardware devices, such as display panel and hard disk, are turned off to conserve
energy.
Hibernate Suspend
In this mode, all system data are saved in the hard disk before powering down. When this mode is activated,
all system state and contents are saved to the hard disk drive after a period of inactivity defined by the user.
No power or very little power is drawn from the battery module under this mode.
However, depending on how much RAM that has been installed on your computer, the amount of time the
system requires to restore all its previous contents can range from five to 20 seconds.
Power Button Action
Intel classmate PC - Convertible power button can be set to turn off the system or activate the suspend mode.