Zycoo X10, Руководство пользователя

Страница: 15 / 22

IP SIP Paging Gateway User Guide | ZYCOO Co., Ltd.
12
Relay Control
•
Trigger Type: This setting represents the responds by the triggers, there are ‘On’, ‘Fast Flashing’, and
‘Slow Flashing’ options to choose from.
•
Mode: This setting is only available if the ‘Trigger by Input Signal’ is disable and it represents
the reset mode after the trigger is responded, there are ‘Delay Reset’, ‘Answered Reset’, and ‘Hang-up Reset’
options to choose from.
•
Duration (sec): This setting is only available if reply control mode is on Delay Reset, it represents the
time duration when the configure interface status changed.
Multicast Settings
The multicast settings are used to configure the parameter settings of the multicast function on the SIP Safety
Intercom. It can configure to monitor up to 9 different levels of multicast addresses, the audio streams with a
higher priority will interrupt the playback of the lower priority audio streams.
Please go to Advance Settings -> Multicast Settings.
•
Priority: Priority from highest 9 to lowest 1
•
Multicast Address: The multicast address range is 224.0.0.0 – 239.255.255.255
•
Multicast Port: The multicast port range is 2000 - 65535
•
Name: Customize a name of the multicast address
•
GPIO Trigger: Options to choose from are ‘Disabled’, ‘On’, ‘Fast Flashing’, ‘Slow Flashing’