Zycoo IA03, Руководство пользователя, Страница: 14 / 20

IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
11

Trigger by Input Signal: Enable/Disable, enable this option when need to use Input signal to trigger

Trigger by DTMF Signal: Enable/Disable, enable this option when need to use DTMF signal to trigger
(only RF2833 supported).

DTMF: This setting represents the number to dial when DTMF triggered.

Trigger by Call Status: Enable/Disable, enable this option will change the call status when triggered.

Event: There are three option for the trigger call event:

1) If “Outgoing”, the dry contact relay output will be triggered when someone presses the call button of
the SIP paging gateway to establish a paging/intercom call.

If “Incoming”, the dry contact relay output will be triggered when the SIP paging gateway gets an
incoming SIP paging/intercom call.

If “Hangup”, the dry contact relay output will be triggered when a SIP call ends on the SIP paging
gateway.
Relay Control
 Trigger Type: This setting represents the responds by the triggers, there are ‘On’, ‘Fast Flashing’,
and ‘Slow Flashing’ options to choose from.

Mode: This setting is only available if the ‘Trigger by Input Signal’ is disable and it represents
the reset mode after the trigger is responded, there are ‘Delay Reset’, ‘Answered Reset’, and ‘Hang-up
Reset’ options to choose from.
 Duration (sec): This setting is only available if reply control mode is on Delay Reset, it represents the
time duration when the configure interface status changed.