2
Hardware
Installation
To avoid any device damage and bodily injury caused by improper use,
please observe the following rules.
If you need to open the casing to install the FXO/FXS module, please make sure
that the power is kept off during the whole installation process.
The device works only under the correct power supply. Please confirm that the
power supply is consistent with the voltage marked by the device, and it is
suggested to use the included power supply.
Before the device is powered on, please confirm that the power circuit will not be
overloaded so as not to cause unnecessary damage.
To avoid the risk of electric shock, do not open the casing when the device is
working!
Before cleaning the device, cut off the power supply. Do not clean it with a
waterish material; never use any other liquid cleaning method.
The followings are the instructions for setting up ZYCOO T100S IP PBX. Please refer
to the illustration and follow the simple steps below to quickly install your IP phone
system.
Safety
Precautions
1
2
3
4
5
