ZX100 Series IP PBX
V1.2 Editor:Yu 7
th
,Jan,2011
46
There are 30 default users, the extensions number are 801~830
Set user, Extension is 803,Name, Password and Caller ID, etc
Select Dial Plan is DialPlan1
Set Extension 804 as the same way
Use a IP Phone based SIP protocol registered with the user.
Then you can use 803 call 804 successfully.
11.4 How to make an outbound call
To make an outbound call, we need to add a trunk first. There are two types of Trunk:
Analog Ports:
FXO ports of ZX100, connect to PSTN lines.
VoIP Trunk:
SIP or IAX trunk, connect to remote SIP/IAX server
I am using ZX100-A16, the port1-4 are configured as FXO ports. When a port is
configured as FXO port, the corresponding LED shows
RED
. When a port is configured as
FXS port, the corresponding LED shows
GREEN
.
11.4.1 Make call via PSTN trunk
You can use the PSTN trunking to make outgoing call via your outsi line. The set up is as
per below:
E1/PSTN
X-lite extension:801
IP:192.168.1.81
X-lite extension:802
IP:192.168.1.82
Extension:803
IP:192.168.1.83
Extension:804
IP:192.168.1.84
Connect to
E1/PSTN
from E1/FXO
channels
ZX100:192.168.1.100
Add Analog Trunk
Trunks -> Add a Trunk:
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
