ZyCast digi-MOD HD Series, Руководство пользователя и инструкция по установке, Страница: 15 / 20

Common Setup Menu
Device Address
– Use the Scroll Up/Down button to select Device Address. Press the OK
button to enter the Device Address menu. Use the Scroll Up/Down to select the Desired
Address ranging from 1 to 255 then press OK to set. A unique device address is required if
setting up more than 1 encoder per site. This allows the user to distinguish each device.
Default Con1iguration –To reset the Encoder/Modulator back to the factory default select
the Default Con>iguration Menu. Press OK to enter the Default Con>iguration Menu. There
are three options that you can choose. Using the Up/Down button select No, New Zealand
and Australia. Press OK to reset all programmed settings back to the factory default setting.
Back to Main- Select Back to Main to escape the Common Setup Menu.
RF Setup Menu
Select RF - Press the OK button to enter the Select RF menu. Use the Scroll Up/Down
button to Select the RF section of the Encoder. Select 1 or Select 2.
Note: The QUAD version of the unit has 2 RF Sections. The Quad will place 2 RF channels in
the >irst RF output and 2 RF Channels in the second RF output.
Enable RF - Use the Scroll Up/Down button to select Enable/Disable RF.
Output Channel – Use the Scroll Up/Down button to change the output channel. Use the
Scroll Up/Down buttons to select the desired Output Channel. Once the desired output
channel is selected press the OK button to set the channel.
The LCD Display will show both the channel number and the frequency number of the
output channel (example: 39 (606.5 MHz))
Attenuation – Use the Scroll Up/Down button to select Attenuation. Press the OK button to
enter the Attenuation menu. Use the Scroll/Up down button to select the desired
attenuation in 1dB increments from 0 to -20 dB. Once the desired attenuation level is found
press the OK button to set.
FEC-
The FEC is default 7/8.
GUARD INTERVAL
– The GUARD INTERVAL is default 1/32.
OFDM - Use the Scroll Up/Down button to select the OFDM menu. Press the OK button to
enter the OFDM menu. Use the Scroll Up/Down to select the OFDM 2K or 8K. Press OK to
set.
TS ID – Use the Scroll Up/Down button to select TS ID. Press the OK button to enter the TS
ID menu. Use the Scroll Up/Down button to select the desired Stream ID ranging from 1 to
65535 then press the OK button to set.
Network ID – Use the Scroll Up/Down button to select Network ID. Press the OK button to
enter the Network ID menu. Use the Scroll Up/Down button to select the desired Network
ID ranging from 1 to 65535 then press the OK button to set.
ORG Network ID – Use the Scroll Up/Down button to select ORG Network ID. Press the OK
button to enter the ORG Network ID menu. Use the Scroll Up/Down button to select the
desired ID ranging from 1 to 65535 then press the OK button to set.
Network Name
– Use the Scroll Up/Down button to select Network Name. Press the OK
button to enter the Network Name menu. Use the Scroll Up/Down button to select the >irst
character for the desired Network Name then press the OK button to set. Repeat the
15 HD-4797 Manual V1.0