HD-2002DM User Guide and Install Manual
Page 7
STEP 5
: RF Setup
Use the RF Setup Page to setup each RF Output.
STEP 6
: Local Save
Once all parameters are set you are required to do a Local Save.
NOTE:
The device shown is a QUAD input device. Your device will
not show RF Output 2 if you are setting up a Single or Dual
input encoder.
STEP 7
: Encoder Setup
Select the
Encoder 1, 2 tab
to program an individual encoder.
Select and change
all desired parameters.
NOTE:
There is an Encoder tab present
for each input on the device.
