HD-1603 User Guide and Install Manual
Page 4
It is highly recommended that quality cables and connectors be used for all video and audio source connections.
1. Use a HDMI cable to connect the video source to the HD-1603 HDMI IN.
2. Use a HDMI cable to connect from the HD-1603 HDMI OUT (loop through) port to the local TV.
3.
Use a coaxial cable lead to connect from the HD-1603 RF OUT to the TV system.
4. Connect the included power supply to the HD-1603 DC 12V power jack.
5. Connect the power supply the power point.
6. If you require Web Management, connect an RJ45 cable to your PC (refer to page 6 for connection procedure).
7. If IR return Path is required, connect an IR Emitter (RL-IR700/800) to the IR Repeater Port and attach to your source you wish to
control. For IR return path to work, please use with RL-RF380, RL-IR700/800 & RL-RF210 Target and follow instructions (please
refer to install manual with RL-RF380 for instructions).
Hardware Installations and Connections
Installation
System Installer must adhere to Australian Standards AS1367:2007 that provides guidelines for proper grounding
and specifies that the cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as possible.
UNPACKING AND INSPECTION
Each unit is shipped factory tested. Ensure all items are removed from the container prior to discarding any packing material.
Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls. If there is any sign of damage
to the unit or damaged or loose connectors contact your distributor immediately. Do not put the equipment into service if there is any
indication of defect or damage.
NOTE:
It is highly recommended that you use a high quality HDMI cable for all source connections.
