3)
Enter Setup Mode:
press and hold the up arrow button until device says SET
UP.
You will want to spend time getting to know the setup mode.
After a few
rides sit down and navigate through the menus.
Play with Set Up mode… it is the
key to knowing the computer.
4)
Default ZUUUM Mode:
from the factory the computer is set to ZUUUM
Clinic mode.
You can see this in setup mode.
ZUUUM mode is abbreviated to
UUU in the setup sequence.
You will not need to change this for your first dozen
rides so no need to do anything at this time.
!
ZUUUM iBike Computer Good to Know Advice
5)
Mounting Bracket:
The bracket’s metal screws can crack the plastic bracket if
the screws are tightened with too much force.
PLEASE do not over tighten the
screws as the bracket plastic will crack.
6)
Newton Q & A Forum:
For FAQ and technical discussions, the Newton iBike
forum can be found here:
7)
ISAAC Software:
It is free and your way to use your computer to get the most
out of the computer.
You can set computer settings and see your ride data.
You
can set your FTP (Functional Threshold Power) easily in your computer.
Get
ISAAC here:
8)
Instruction Manuals:
Yes, there are manuals for the Newton and ISAAC.
You can get them here: www.ibikesports.com
