background image

WARNING:

 Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA:

 Cáncer y daño reproductivo - www.P65Warnings.ca.gov

AVERTISSEMENT:

 Cancer et néfastes sur la reproduction - www.P65Warnings.ca.gov

MODEL ZCSM-RP

Zurn Connected Remote Pressure Monitor

 Installation

 

 

Testing

 

 

Maintenance Instructions

CAUTION: 

The ZCSM-RP is an electronic device.  Use care when handling.  Installation and wiring should be 

performed by qualified personnel.

The ZCSM-RP Connected Remote Pressure Monitor continually monitors your plumbing system water pressure and 

transmits pressure data to plumbSMART™, the secure web portal powered by Zurn.  The maximum system water 

pressure cannot exceed 200 psi.

LEAD-FREE*

1

ZURN WILKINS

1747 Commerce Way, Paso Robles, CA 93446 Phone:

855-663-9876 

 Fax:805-238-5766

www.zurn.com

ZCSM-RP

REMOTE PRESSURE MONITOR

TEE

NIPPLE

TEST COCK

3/4" x 1/2" BUSHING

POWER CABLE

WRENCH HEX AREA

1/2" x 1/4" BUSHING

NOT CONNECTED

PRESSURE SENSOR CORD ON BOX

AC POWER ADAPTER

SERIAL NUMBER

hey Matt or Juana

Connected Remote

Pressure Monitor

Model: 

ZCSM-RP

Serial Number:

Date Code:

Part Number:

ZURN.COM/plumbSMART

1.855.ONE.ZURN

3BNQ5CEV

328790-002

            Contains FCC ID: T9JRN2903

               Contains IC: 6514A-RN2903
   The enclosed device complies with

   Part 15 of the FCC Rules. Operation

          is subject to the following two

  conditions: (1) This device may not

  cause harmful interference, and (2) 

          This device must accept any

      interference received, including

            interference that may cause

                         undesired operation. 

Scan here to learn more:

Scan here to register product:

Power 7.5VDC

Pressure Transmitter

FC

c

Содержание ZCSM-RP







Отзывы: