Page | 7
Using a Television as the Master Device
Follow these instructions to use a television as the Master Device. Whether the Master Device is powered ON or
OFF will control the flow of power to the Controlled Outlets.
Step 1 – Prepping the Surge Protector
Remove the protective film (or static bag) from the surge protector and verify that there are no cracks or major
damage to the housing.
Step 2 – Power ON
Plug the ZuniDigital Smart Green Surge Protector™ into a wall socket and flip the Main Power Switch to the
RESET position. At this point the surge protector should be powered ON and the Main Power Switch should be
illuminated. Also verify that the Surge Protection Indicator is illuminated.
Step 3 – Master Device Setup
Plug a television set into the outlet labeled “
Maste
r”. Whether this Master Device is powered ON or OFF will
control the flow of power to the Controlled Outlets.
