Zünd AKI 2, Инструкция по эксплуатации

Страница: 9 / 12

Instruction Manual
Operation
AKI 2 9
6. July 2006, muj, _1
4.3 Height adjustment
(Fig. 5) Adjust height
• Screw the set screw anticlockwise
• Put the AKI2 flat on the cutting base (Fig. 5, Pos.2)
• Set the set screw (Fig. 5, Pos.4) (lower clockwise, lift anticlockwise) that it touches
the table top
Important Ensure that the set screw is set such that the AKI2 is lying flat upon the cutting base.
1 AKI2 3 Desktop panel
2 Cutting base 4 Adjusting screw
1
2
3
4
w00023