Configuring the LM-CIRIA control unit
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
37
51 Logging in
–
Start point: entry level
Figure 66: Entry level
1. Hold down the
and
navigation buttons at the same time for approx. two seconds.
=
SERVICE MENU
selection level appears.
Figure 67:
SERVICE MENU
selection level
2. Select
LOGIN
.
=
Settings level appears.
=
The first position of the six-character password illuminates.
Figure 68:
LOGIN
settings level
3. Run your finger along the touchring until the desired letter or number for the first position of your
password is illuminated.
4. Press the on/off key to accept the letter/number.
=
The password letter or number is accepted.
=
The next password position illuminates.
5. Repeat steps 3 and 4 until the password has been completely entered.
6. To access the
SERVICE MENU
selection level, select
OK
.
=
You have logged in.
=
SERVICE MENU
selection level appears.
Notes
•
To delete a letter or number from the password (e.g. if an incorrect character was entered), select
<POS
or
POS>
to move to the desired position in the password. Select
DEL
to delete an entry.
After an entry is deleted, the password position before it illuminates.
•
Other letters and special characters can be accessed by running your finger along the touchring.
Содержание LUXMATE CIRIA
Страница 1: ...LUXMATE CIRIA Instructions for start up and use ...
Страница 2: ......
Страница 139: ......
Страница 142: ...www zumtobel com ciria LUXMATE CIRIA Instructions for start up and use ...