13
13.1 Alarm Interval
13.2 Recording Time
13. Power Saving Settings
This is a function that avoids repeated alarms for the same event.
You can choose an alarm interval of different lengths, if the interval is 5 minutes,
then the camera is triggered at 08:00, you will receive an alarm message, and
you will not receive a new alarm push in the next 5 minutes, even if motion
detection continues to occur.
NOTE:
This function is off by default, you can set it as needed.
You can choose a different recording length if you set the recording length to 20
seconds, then after the camera is triggered, you can view the 20 seconds of
alarm video in the history of cloud playback.
5:51
060238708
<
Device Information
Receive Alert Notifications
Installation Guide
Device Share
Location Management
Image Setting
Alarm Management
Network Indicator
Time Setting
Sound Settings
Cloud Storage Service
Battery Management
Recording Management
5:51
Custom Mode
<
Day Detection
The Alert will be triggered only when human
motion is detected.
Recording Time
Night Detection
10 seconds
20 seconds
30 seconds
Alarm Interval
* This mode has a long video replaording time, Which
will cause excessive power consumption
Off
2 minutes
5 minutes
10 minutes
5:51
Alarm Management
<
After turning it on, you can monitor the human
behavior who stands in front of the device and send
alarms. It is possible to choose different detection
sensitivities.
Detection sensitivity is supported to select from 1
to 10. Higher the value, easier to tigger the motion
detection and alaem.
Select The Working Mode of The Current Camera
Deteciton Sensitivity
1
2
3
4
5
6
7
8
9 10
Set the time period of the alarm, the device only
triggers an alarm event during this time period.
Audio warning and strobe light is only valid at night
Custom Mode
Alarm Working Mode
Alert Plan
Alarm Area
Audio warning and strobe light
Содержание GX2K
Страница 30: ......
