
32
33
6. DETECTING FAULTS AND PROBLEMS AND SECURITY ADVICES
POSSIBLE CAUSE
SOLUTION
PROBLEM
The machine is not operating
The machine blocks frequently
during juicing
The pressing units are blocked
The pressing units are not
synchronised
The peel ejectors break
The motor is running but the
pressing units are not turning
The tap gets blocked
(Zumex Speed Tank Podium &
Zumex Speed D Tank Podium)
The machine stops every so
often
The machine is not plugged in
No power is reaching the plug
Cover not properly fitted
Faulty safety detectors
Faulty ON/ OFF switch
Faulty circuit
Insufficient voltage
Faulty circuit
Oranges are jammed
Internal fault
Peel ejectors are incorrectly fitted
Internal fault
Pips or excessive pulp in the fruit
Insufficient ventilation
Electricity overload
Plug it in
Check plug and socket
Ensure it is placed it correctly
Contact Technical Support Service
Contact Technical Support Service
Contact Technical Support Service
Check that the voltage matches that
indicated in the manual.
Contact Technical Support Service
Eliminate blockage
Contact Technical Support Service
Fit according to instruction manual (Fig. 6)
Contact Technical Support Service
Dismantle the top part of the tap and
clean (detail Fig 3.). Make sure that both
the juice tank filters are in place.
Check that the appliance's ventilation
grilles are not blocked.
Contact Technical Support Service
• FOR ALL MODELS
• ONLY FOR DIGITAL MODELS
POSSIBLE CAUSE
SOLUTION
PROBLEM
Light no. 5 does not turn on
(see fig. 4)
Light no. 4 turns on (see fig. 4)
Check that the appliance is properly
plugged in and if it still does not work,
contact Technical Support Service
Ensure it is placed correctly
IMPORTANT SAFETY PRECAUTIONS
Always unplug the machine before carrying out any procedures to remove obstructions.
To avoid accidents, do not manipulate this appliance to make it work without the cover safety
detectors.
The cover actions the safety detectors. The correct functioning of the safety detectors should
be tested from time to time. To do this, remove the cover, upon which the appliance should stop
working; if the appliance does not cut off upon removing the cover, contact the Technical Support
Service.
If the power cable is damaged, do not manipulate it, contact the Technical Support Service.
When moving the appliance and housing ensemble (Zumex Speed Tank Podium & Zumex Speed
D Tank Podium):
Unblock the front wheels of the housing.
Never push the appliance, always the housing. Never pull the appliance towards you.
EN
No power is reaching the plug
Cover not properly fitted
ZUMEX, MÁQUINAS Y ELEMENTOS S.A.
Pgno. Inds Moncada II · c/ La Closa, 16
46113 Moncada, Valencia, España
Tfno: +34 961 301 251 · Fax: +34 961 301 255
www.zumex.com · [email protected]
Содержание SPEED D
Страница 43: ...84 85 NOTAS NOTES NOTAS NOTES ...
Страница 44: ...86 87 NOTAS NOTES NOTAS NOTES ...