Elite 3.5 LCD ZUMspot kit user guide
Copyright 2019-2022 ZUM Radio, Inc
6
Rev 1.3
Setup Pi-Star:
Configure display type:
●
In the
“MMDVMHost Configuration”
section
●
Make sure
“MMDVM display Type”
is set to
“Nextion”
●
Make sure
“Port”
is set to
“Modem”
●
Make sure
“Nextion Layout”
is set to
“ON7LDS L3”
Ethernet:
●
If you are using Ethernet, the IP address should automatically be retrieved by the DHCP system
built into the PiStar software. No other configuration should be needed.
