background image

88

ZIP2x2 User’s Manual

Versions. 

You can update the software version. Later versions may include more features or better

support for existing features. The boot code permanently resides on the phone and you cannot
modify it. You may need to provide the hardware version and date of manufacture if you need
support on the phone. The versions on your phone may be different from those shown in the
following examples.

See section 4.4.5 on page 34 for instructions on updating the software.

8.4

User Settings

This menu selection allows you to tailor the phone to suit your personal preferences. When you
select 

Menu | User Settings

 the display shows:

This example shows nine rows, though in practice the display can show only three rows at once.
As you press the 

Up

 and 

Down

 keys, the display scrolls through the list of choices. The options

include:

LCD Contrast. 

Improve readability of the display. See section 8.4.1.

Greeting. 

Change the display in the idle state. See section 8.4.2.

Clear settings. 

Reset the settings to those created by the system administrator. See section 8.4.3.

Date and Time. 

Set the current date and time and the offset from GMT. See section 8.4.4.

Info | Manfr
}S/W version

1.0.2

Info | Manfr
}Boot code

1.0.15.bhost

Info | Manfr
}H/W version

00

Info | Manfr
}Manufactured on

12 Jan 2005

User Settings
}LCD Contrast

Greeting
Clear settings
Date and Time
Audio
Event Timer
Regional Optns
Factory default

Содержание ZIP2x1





































































































































































































Отзывы: