Zultys BPS12, Руководство по оборудованию

Страница: 27 / 44

5. Installing the BPS12
23
The BPS12 has a universal ac input that you can connect to a standard electric outlet (90 Vac to
264 Vac, 47 Hz to 63 Hz). The BPS12 draws a maximum current of 9.3 A from its ac input.
5.2.1.6 Cable Lengths
You need to install the BPS12 so that you can run the battery supply cable to your load. The length
of the cable is 2 m (6 feet).
5.2.1.7 Other Site Requirements
Ensure that you select a site so that liquids or objects will not fall onto the equipment and so that
foreign objects will not be drawn into the ventilation holes.
5.2.2 Electrostatic Discharge (ESD) Precautions
Almost all electronic components can be damaged by ESD during handling. Component damage
can occur at ESD voltages as low as 50 V. A person walking across a nylon carpet can easily
generate voltages in excess of 5000 V.
Observe the following guidelines to help prevent ESD damage when installing or servicing the
BPS12 or any other electronic device.
•
Assemble or disassemble equipment only in a static-free work area.
•
Use a conductive work surfaces (such as an antistatic mat) to dissipate static charge.
•
Wear a conductive wrist strap and lab coat to dissipate static charge accumulation.
•
Minimize handling of assemblies and components.
•
Keep replacement parts in their original static-free packaging.
•
Remove all plastic, foam, vinyl, paper, and other static-generating materials from the
immediate work area.
•
Use tools that do not create ESD.
In addition to these precautions, do not handle connector pins to avoid contamination.
Caution
You can easily damage the
BPS12
by failing to follow these instructions. You may
delay installation, or cause the equipment to prematurely fail. Such failure may lead
to a disruption of the service provided by the equipment. You may also void your
warranty.
5.3 Installation
5.3.1 Tools and Cables Required for Installation
5.3.1.1 Tools
Figure 5-1 shows the required tools for completing the hardware installation: