www.zuhne.com
VENTUS 30 Kitchen Range Hood
5
INSTALL MOUNTING BRACKETS
1.
After eveluating the height of the hood, place the hook
center over installation location.
Drill 3 holes of Ø8mm
on a suitable place to fix the mounting brackets.
2.
Put the drywall anchors into the holes and fix the
mounting screws (4x40mm) into the anchors, and install
the hook on the wall as shown.
INSTALL SLIDERY DUCT
FIXING SUPPORT
1. Calculate the final height of the U-shaped section, drill 2
holes of Ø8mm on a suitable place in line with the slidery
duct fixing support.
2. Put the drywall anchors into the holes and fix the mounting
screws (4x40mm) into the anchors, and install the hook on
the wall as shown. (The rest two pares of 4x40mm screw
and drywall anchors are for spare)
