ZUG CombairSteamer V2000, Руководство по эксплуатации

Страница: 21 / 72

4 Operation
4.7 Options
Overview
Each application offers different options. Your appliance has the following «Options»:
Preheat (see page 22)
Steaming (see page 35)
Start later (see page 22)
Selecting and starting options
▸ Select an application from the desired application group and confirm with «OK», if re-
quired (see page 17).
– The ready to start screen appears in the display.
▸ Touch .
– The options menu appears in the display:
Start later
This allows you to set the
appliance to start at a later
time. It retains any values
you entered and does not
switch to standby mode.
Start later
On
OK
Preheat
▸ Touch the desired option.
▸ In the right content pane of the display, either turn on the option with the switch or
touch the value range and set the desired value using the CircleSlider.
– Each defined option is marked with a .
▸ Confirm the setting with «OK».
– Several settings can also be confirmed at once with «OK».
– The ready to start screen appears in the display.
▸ Press «Start» to start the application.
4.8 Checking and changing the settings
Values and settings can be changed before and during operation. Exceptions are setting
the end time during operation (see page 28) and preheating (see page 22).
Only the operating time can be set for Sabbath applications. Values and settings
cannot be changed during operation.
▸ Touch the field for the desired setting.
▸ To adjust or reset a value, touch the value range and adjust the value using the
CircleSlider.
– The colour of the value range changes to amber.
▸ To turn the option on or off, touch the switch.
▸ Confirm the setting with «OK».
21