ZUG CombairSteamer V2000, Руководство по эксплуатации

Страница: 20 / 72

4 Operation
4.6 Delayed start / end
The delayed start is activated when for the application selected both the operating time
and end are set. The appliance switches automatically on and off again at the desired
times.
No delayed start can be set for Sabbath applications .
Setting a delayed start
▸ Select the desired application (see page 17).
▸ Set the operating time (see page 19).
▸ Set further options, if required (see page 21).
▸ Put the food in the cooking space if the «Preheat» option has not been turned on.
If the «Preheat» option has been turned on, do not put the food into the cooking
space until the acoustic signal is emitted and the corresponding message ap-
pears.
Before setting the delayed start,
▸ in the value range, touch «End».
– The colour of the value range changes to amber.
▸ Set the desired end time using the CircleSlider.
– The desired duration and the set end time ap-
pear in the display:
15min 13:21
▸ Press «Start» to start the delayed start.
– The time set or remaining to the start of opera-
tion and the end of operation appear in the dis-
play:
15min 13:21
Appliance starts in: 32min
▸ If necessary, check and change the settings (see page 21).
– Any changes to the «Operating time» or «End» options cause the time remaining to
the start of operation to be recalculated.
If «Operating time» has been set, the end time cannot be set or adjusted during
operation.
Example
▸ Select the «Hot air» application and 180 °C.
▸ At 8:00, set an operating time of 1 hour and 15 minutes.
▸ Set the end time to 11:30.
– The appliance switches on automatically at 10:15 and off again at 11:30.
20