ZUG BCXSE60, Руководство по эксплуатации

Страница: 37 / 52

11 Care and maintenance
▸ Starting from the bottom, press the seal
evenly into the groove.
11.6 Replacing the door seal on pyrolysis appliances
▸ Remove the damaged door seal.
▸ Clean the groove
3 with a slightly damp cloth.
▸ Press the new door seal 1 into the groove, with the
seam joint 2 not at centre bottom of the frame
2 3 1
▸ Ensure that only the thinner part 4 of the seal is
pressed into the groove; the thicker part 5 must
not be in the groove.
4
5
▸ Starting from the bottom, press the seal evenly into
the groove.
11.7 Replacing the halogen light bulb
WARNING: Risk of electric shock!
Disconnect the appliance from the mains power supply before replacing the halo-
gen light bulb.
Risk of burns from hot surfaces!
Allow the halogen light bulb and the appliance to cool down before replacing the
halogen light bulb.
37