ZUCCHETTI KOS Quadrat Relax, Руководство по установке, использованию и техническому обслуживанию

Страница: 45 / 104

45
Quad r at R e lax
45 45 45 45 45 45 45 45 5 5 5 5 5 5 45 5 5 45 45 45 5 45 4 5 4 5 5 4 5 5 45 5 5 5 5 4
MAIN ERRORS DISPLAYED ON THE KEYBOARD
FLO: It indicates the lack of flow when there should be.
It can be caused by a dirty filter, a closed recirculation system
valve or by recirculation pump failure
ER: It indicates that the maximum temperature of >45°C was
exceeded or the temperature is under <5°C. All loads are
automatically cut-off. The error conditions is automatically
reset if the temperature returns within the normal range.
FLC/Temp.°C: The flow gauge reads the water flow despite the
pump being off. In normal conditions, it is displayed dur-
ing the filling phase, alternating with the temperature. Or it
indicates a flow gauge fault
HI: Maximum >42°C temperature exceeded
All loads are cut-off. It may also be caused by an exchanger
solenoid valve failure.
LL: The pool level capacitive sensor does not read water.
Pool water level too low. The sensor can also be influenced
by residue in the pool or be defective.
ICE: It indicates that the automatic defrost system has turned on
It automatically turns on when the water temperature drops
below 7°C.
If an error message appears, try to resolve it by following
the instructions. If the problem cannot be resolved, unplug
the Quadrat Relax from the power supply and contact a
Service Centre authorised by the Manufacturer.
E N - SO LUTI O N S O F SO M E PR O BL E M S