Thank you for purchasing ZTW Beatles Brushless Electronic Speed Controller (ESC). ZTW
Beatles series ESC is a beginning level product line designed for xed wing. It features super
smooth start up and throttle linearity, multiple protection, low cost and best performance at
this level of product. This is not a toy., only for adult. Age under 14 should be supervised with
adult. Please read this manual carefully before using this product for the sake of safety. ZTW
Model have no control over the use, installation, application, or maintenance of these
products, thus no liability shall be assumed nor accepted for any damages, losses of costs
resulting from the use of this item.
Important Warnings
▲
ZTW is not responsible for your use of this product, or any damage or injuries you may
cause or sustain as a result of its usage.
▲
Always place safety as priority when you use the product
▲
An electric motor that is connection with battery pack and ESC may start unexpectedly and
cause serious danger. Always treat them with enough respect.
▲
We recommend you to remove the propeller when you working on the plane that with
power source connected.
▲
Observe all local laws when you y a RC aircraft or other RC vehicles
▲
Never y over others or near crowds.
Wires Connection:
The speed controller can be connected to the motor by soldering directly or with high quality
connectors. Always use new connectors, which should be soldered carefully to the cables and
insulated with heat shrink tube. The maximum length of the battery pack wires shall be within
6 inches.
● Solder controller to the motor wires.
● Solder appropriate connectors to the battery wires.
● Insulate all solder connectors with heat shrink tubes.
● Plug the “JR” connector into the receiver throttle channel.
● Controller Red and Black wires connects to battery pack Red and Black wires respectively.
BATTERY
RECEIVER
1
